弄了一台不带硬盘二手的S822,装上了新的硬盘,折腾了几天还不能把AIX 装上,请问哪位高人可以给点指导 ?情况是这p8 目前可以连上HMC 建立LPAR但是没法安装AIX 因为在SMS里选DVD来启动都没效果,是否要先装VIOS?自个猜是缺了些步骤,但又没头绪 。。。
1、LPAR是使用全部资源吗,如果不是确认DVD设备是否被划进了LPAR中
2、如果要安装VIOS,需要PowerVM的授权,请确认是否有相关License
3、Power8的处理器对操作系统版本有要求,参考一下你的版本是否满足:
AIX Version 6.1
The following minimum level of AIX Version 6.1 supports the Power S822:
AIX Version 6.1 with the 6100-09 Technology Level and Service Pack 3, with APAR IV56366
or later
These additional AIX levels are supported in an LPAR by using virtualized I/O only:
AIX Version 6.1 with the 6100-09 Technology Level and Service Pack 1, or later
AIX Version 6.1 with the 6100-08 Technology Level and Service Pack 1, or later
AIX Version 6.1 with the 6100-07 Technology Level and Service Pack 6, or later
AIX Version 7.1
The following minimum level of AIX Version 7.1 supports the Power S822:
AIX Version 7.1 with the 7100-03 Technology Level and Service Pack 3, with APAR IV56367
or later
These additional AIX levels are supported in an LPAR by using virtualized I/O only:
AIX Version 7.1 with the 7100-03 Technology Level and Service Pack 1, or later
AIX Version 7.1 with the 7100-02 Technology Level and Service Pack 1, or later
AIX Version 7.1 with the 7100-01 Technology Level and Service Pack 6, or later
Note:
The POWER8 compatibility mode is supported on AIX Version 7.1 with the 7100-03
Technology Level and Service Pack 3 and later.
All other prior AIX V7.1 levels and AIX V6.1 can run in POWER6, POWER6+, and
POWER7 compatibility mode.
The Easy Tier function that comes with the 18 bay storage backplane (#EJ0P) requires:
– AIX Version 7.1 with the 7100-03 Technology Level and Service Pack 3 with APAR
IV56367 or later
– AIX Version 6.1 with the 6100-09 Technology Level and Service Pack 3 with APAR
IV56366 or later
收起